############################################################
## Copyright: 2010 Integrated Sytems Laboratory, ETH Zurich
##            http://www.iis.ee.ethz.ch/~sha3
############################################################
freeDesign

set DESIGNNAME shavite

## Load the configuration file 
loadConfig src/${DESIGNNAME}.conf 0
commitConfig
fit

## Make sure we have two corners. No need for MMMC in this one
setTimingLibrary -max Max -min Min
setDesignMode -process 90

## floorplan
floorPlan -site core_2800 -r 1 0.85 30 30 30 30

## power routing
source scripts/globalnet.tcl 
source scripts/power_grid.tcl 

## use all CPUs (2 in my case)
setMultiCpuUsage -localCpu [getMultiCpuUsage -localCpu] -cpuPerRemoteHost 1 -remoteHost 0 -keepLicense true


##place
setPlaceMode -fp false
placeDesign -PrePlaceOpt

# Change to Physical View
setDrawView place
fit

## checkTiming
set_global report_timing_format {instance arc cell slew load fanout delay arrival}
unloadTimingCon
loadTimingCon src/${DESIGNNAME}.sdc
timeDesign -preCTS

# Tie Cells Rep
source scripts/tiehilo.tcl

## This will most likely be necessary
optDesign -preCTS
## check the timing after this

## insert clock tree
specifyClockTree -file src/${DESIGNNAME}.ctstch
clockDesign -specFile src/${DESIGNNAME}.ctstch -outDir timingReports -fixedInstBeforeCTS

# Time Opt
optDesign -postCTS
optDesign -postCTS -hold

# final route
setNanoRouteMode -quiet -routeTopRoutingLayer default
setNanoRouteMode -quiet -routeBottomRoutingLayer default
setNanoRouteMode -quiet -drouteEndIteration default
setNanoRouteMode -quiet -routeWithTimingDriven false
setNanoRouteMode -quiet -routeWithSiDriven false
routeDesign -globalDetail

## check timing
timeDesign -postRoute

## make sure there are no violations for hold
timeDesign -reportOnly -postRoute -hold

# Time Opt
optDesign -postRoute
#optDesign -postRoute -hold

# Verify Connectivity
verifyConnectivity -type all -error 1000 -warning 50

# Verify Geometry
verifyGeometry

# Report Gate Count
reportGateCount -level 5 -limit 100 -outfile ${DESIGNNAME}.gateCount

# Summary
summaryReport -noHtml -outfile ${DESIGNNAME}_summary.rpt

# Export Files
source scripts/exportall.tcl  

# we are done here
saveDesign save/${DESIGNNAME}.enc   

    
# Report Power
set_power_analysis_mode -reset
set_power_analysis_mode -method static -corner max -create_binary_db true -write_static_currents true -honor_negative_energy true -ignore_control_signals true
set_power_output_dir -reset
set_power_output_dir powerReports
set_default_switching_activity -reset
set_default_switching_activity -period 10000.0
read_activity_file -reset
read_activity_file -format VCD -vcd_scope quarktb/mutinst -start {} -end {} -vcd_block {} ../modelsim/vcd/${DESIGNNAME}.vcd
set_power -reset
set_powerup_analysis -reset
set_powerup_analysis -mode accurate -ultrasim_simulation_mode ms
set_dynamic_power_simulation -reset
report_power -rail_analysis_format VS -outfile powerReports/${DESIGNNAME}.rpt